In industrial settings involving high-flow, highly corrosive media—such as the transport of strong acid/alkali waste in large-scale chemical parks, the transfer of corrosive fluids in wastewater treatment plants, or the handling of ore slurries in hydrometallurgy—DN200 (large-bore) piping is frequently used. When rigid piping is employed, thermal expansion and contraction, combined with equipment vibration, often lead to weld cracking or flange misalignment and subsequent leakage. Meanwhile, standard small-bore flexible hoses are entirely inadequate for high-flow, high-pressure requirements. A leak of highly corrosive media not only results in significant material loss but can also trigger major safety or environmental incidents, potentially causing direct and indirect losses amounting to millions of yuan. Our DN200 flanged, acid/alkali-resistant chemical hose—featuring an integrally molded, corrosion-resistant structure and a highly reliable flanged sealing system—enables stable, flexible transport of high-flow, highly corrosive fluids, providing a robust solution for stress compensation in large-scale corrosive fluid transport systems.
Large-diameter DN200 flanged chemical hose resistant to strong acids and alkalis
- 2026-11-19 09:41:47
Integrally molded, large-bore, corrosion-resistant structure for stable performance under high-flow, highly corrosive conditions
Many large-bore hoses are essentially scaled-up versions of smaller chemical hoses, often manufactured using multi-segment splicing. Such products frequently fail to meet the concentricity and structural strength requirements for a DN200 specification; under the sustained impact of high-flow, highly corrosive media, they are prone to localized bulging or the delamination and detachment of the inner liner. In contrast, our DN200 flanged, acid/alkali-resistant chemical hose is produced using specialized large-bore extrusion and continuous molding processes. The entire hose—spanning tens of meters—is manufactured as a single, continuous piece with no intermediate seams. The wall thickness remains uniform throughout the entire circumference, effectively resolving common industry challenges such as poor concentricity and localized structural weaknesses under pressure. The inner lining, which comes into direct contact with strong acid or alkaline media, is constructed from high-purity modified EPDM rubber—with an optional PTFE composite configuration—and features a formulation specifically optimized for various concentrations of strong acids and bases. For the transport of standard-concentration acidic or alkaline waste, a highly wear-resistant modified EPDM lining is used; it remains free from swelling, degradation, or material shedding even when exposed for extended periods to 30% strong acids or 50% strong bases at temperatures up to 90°C. For applications involving highly concentrated, strongly oxidizing acids and bases, or highly corrosive hydrometallurgical slurries, the lining is upgraded to an extruded PTFE layer. This extends the chemical resistance to include highly oxidizing media such as 98% sulfuric acid or concentrated nitric acid, providing durability against almost all common, highly corrosive chemicals.
The reinforcement layer consists of multiple plies of high-strength synthetic polyester fibers, applied via a crisscross winding pattern. Using specialized, large-diameter winding equipment, the tension and angle of each fiber layer are precisely controlled to ensure uniform stress distribution across the entire pipe wall. The resulting hose achieves a burst pressure consistently exceeding four times its rated working pressure, providing a substantial safety margin. This ensures the hose can withstand transient pressure surges and water hammer effects during the transport of high-flow, strong acid or alkaline media, effectively preventing catastrophic pipe bursts. Furthermore, the multi-ply fiber-wound structure offers exceptional tensile resistance, limiting axial elongation under pressure to less than 2%—thereby preventing the excessive stretching that could otherwise strain the flanges at either end of a large-diameter hose.
The outer cover is made of a thickened, modified EPDM rubber that is resistant to weathering and chemical splashes. It is specially formulated with additives that provide resistance to ozone, ultraviolet (UV) radiation, and corrosive acid or alkaline splashes. This ensures long-term durability in the complex environments of chemical industrial parks—characterized by intense UV exposure and the potential for exposure to corrosive substances—preventing premature chalking or cracking of the outer surface and providing a robust protective barrier for the internal reinforcement and corrosion-resistant lining. The outer cover has been reinforced and optimized for superior wear resistance. It can withstand prolonged dragging and friction against rough concrete surfaces or steel structural pipe racks in industrial facilities without wearing through prematurely, significantly extending the service life of these large-diameter hoses in outdoor environments.
A specialized flange connection and sealing system for large-diameter hoses ensures zero leakage across the entire sealing face, even in highly corrosive applications.
In conventional large-diameter chemical hoses, the end-flange connection often relies on simple crimping methods originally designed for smaller-diameter hoses. This results in insufficient connection strength, making the hose prone to detaching from the flange under high-pressure, large-bore operating conditions. Furthermore, inadequate corrosion protection on the sealing surfaces often leads to rapid rusting of the metal flanges when exposed to strong acids or alkalis, resulting in leaks. This DN200 large-diameter chemical hose—designed for resistance to strong acids and alkalis—utilizes a specialized flange connection and sealing system. Every aspect, from the selection of flange materials and the end-crimping structure to comprehensive anti-corrosion treatment of the entire sealing face, has been optimized to completely eliminate the risk of leakage at the flange connection.
Depending on the corrosivity of the conveyed medium, the flange fittings can be customized with various corrosion-resistant materials, such as solid polypropylene (PP), PTFE-lined, or high-grade stainless steel flanges, ensuring a perfect fit for diverse, highly corrosive operating environments. The structural integrity of the flanges has been specifically verified to withstand the axial tensile forces generated when the DN200 hose is subjected to its full rated pressure, ensuring no deformation or cracking occurs. The connection between the flange and the hose body employs a specialized multi-stage progressive crimping process. Using precision CNC equipment to control the degree of compression, the metal crimping ring is driven deep into the hose’s reinforcement layer, creating a high-strength, integrated assembly. This design eliminates the critical safety hazard of the hose detaching from the flange under rated operating pressure. The entire flow-contact surface of the flange is fully covered with a corrosion-resistant lining, ensuring that strong acid or alkali media never come into contact with the metal substrate. This completely eliminates the risk of seal failure caused by the corrosion of the metal surface. The sealing interface utilizes an embedded, corrosion-resistant gasket design; the gasket sits securely within a dedicated positioning groove on the flange face, preventing displacement or penetration by high-pressure media—even in large-diameter, high-pressure applications. When two flanges are joined, the entire interface forms a continuous, corrosion-resistant seal, effectively blocking any potential leakage paths for strong acids or alkalis at the connection point. The flange bolt-hole patterns can be customized to comply with various major standards, including GB (Chinese National Standards), HG (Chemical Industry Standards), and ANSI (American National Standards). This ensures full compatibility with existing large-diameter rigid piping systems—regardless of when they were originally installed—allowing for direct connection without the need for additional adapter spools, thereby significantly reducing the scope of on-site piping modifications.
The entire flange connection system has undergone rigorous hydrostatic testing, maintaining zero leakage at 1.5 times the rated operating pressure over a 24-hour period. It fully meets the sealing requirements for the long-term transport of high-volume, highly acidic or alkaline media. Furthermore, the structural design facilitates rapid on-site assembly and disassembly, making maintenance—such as gasket replacement—highly efficient. No complex, specialized tools are required, which greatly simplifies the long-term maintenance of large-diameter piping systems.
High-displacement flexible compensation capability for the efficient relief of thermal expansion and contraction stresses in rigid piping systems.
In traditional, fully rigid piping systems used for transporting strong acids or alkalis, long-term operation—subject to fluctuations in both process media and ambient temperatures—can lead to significant thermal expansion and contraction. The resulting immense stress often concentrates at weld seams or equipment connection points, frequently causing weld cracking, misalignment, or leaks. Additionally, high-frequency vibrations generated during the operation of pumps or similar equipment are transmitted directly to the rigid piping, which can lead to fatigue-induced cracking of weld seams over time. This large-diameter (DN200) flanged chemical hose, designed for resistance to strong acids and alkalis, offers exceptional multi-dimensional displacement compensation. Serving as a flexible segment within a piping system, it effectively relieves thermal expansion and contraction stresses in rigid piping, dampens high-frequency vibrations generated by operating equipment, and significantly enhances the operational safety of large-diameter, highly corrosive fluid transport systems.
Empirical data indicates that this DN200 chemical hose provides an axial compression capacity of 25 mm, an axial extension capacity of 14 mm, a lateral displacement compensation of 15 mm, and an angular deflection capability of up to 15°. It is fully capable of accommodating the thermal expansion and contraction displacements typical of large-diameter rigid piping systems subjected to temperature fluctuations. This eliminates the need for bulky metal expansion joints, as the hose efficiently absorbs thermal stress—preventing weld cracks in rigid pipes caused by stress concentration. Furthermore, the hose’s flexible structure effectively isolates high-frequency vibrations produced by pumps and agitators, preventing them from propagating throughout the rigid piping network and substantially reducing the risk of vibration-induced fatigue failure.
The hose has been specifically optimized for flexibility, featuring a minimum bend radius of just 1200 mm. This allows for easy installation within confined pipe racks without requiring excessive additional space, making it an ideal solution for retrofitting or upgrading large-diameter rigid piping systems in chemical industrial parks—it can simply replace existing metal expansion joints. For long-term outdoor use, the outer rubber layer has been enhanced for superior weather resistance; the inclusion of UV-resistant and anti-aging additives ensures the material remains durable and crack-resistant even after prolonged exposure to the elements, guaranteeing stable, long-term operation.
In large-scale wastewater treatment plants—where high volumes of acidic or alkaline waste liquids are transported—systems previously reliant entirely on rigid piping frequently suffered from weld cracks and leaks. This not only incurred significant maintenance costs but also posed environmental risks, as the leakage of highly acidic or alkaline substances could lead to regulatory non-compliance. By incorporating this large-bore (DN200) flanged chemical hose—designed to withstand strong acids and alkalis—as a flexible compensation segment, the entire piping system’s thermal stress is effectively absorbed. This significantly reduces stress levels at the welded joints of rigid pipes, leading to a more than 90% decrease in leakage incidents and substantially enhancing the long-term operational stability of high-flow, highly corrosive fluid transport systems.
For industrial users in sectors such as large-scale chemical processing, wastewater treatment, and hydrometallurgy, this DN200 flanged chemical hose offers an efficient solution to the challenge of thermal stress compensation in high-flow, highly corrosive rigid piping networks. It not only lowers annual operation and maintenance costs but also eliminates the risk of leaks—often caused by stress-induced cracking in conventional, fully rigid piping systems—thereby providing a highly reliable, integrated solution for flexible transport and stress compensation in large-scale, highly corrosive fluid handling systems.
在线留言